TM 5-3895-379-23
WORK LIGHT ASSEMBLY MAINTENANCE - CONTINUED
0091 00
INSTALLATION
1.
Install bracket (9) on support (4) with screw (14), washer (13) and nut (12).
2.
Position work light assembly (8) in support (4).
3.
Position two wires (11) on work light assembly (8) and tighten screws (10).
4.
Install work light assembly (8) in bracket (9) with screw (7) and nut (6).
NOTE
Use cable ties as necessary to attach cables to vehicle.
5.
Install support (4) in support (5) with two washers (2), screws (1), washer (2) and screw (3). Tighten screws.
ADJUSTMENT
1.
Remove two screws (1), washers (2), screws (3), washer (2) and support (4) from support (5).
2.
To raise or lower beam, loosen nut (6) and reposition work light assembly (8) in bracket (9). Tighten nut.
3.
Install support (4) in support (5) with two washers (2), screws (1), washer (2) and screws (3). Tighten screws.
2
1
5
3
4
2
401-495
4.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0091 00-3/(0091 00-4 Blank)
