TM 5-3895-379-23
AMPLITUDE SELECT SWITCH REPLACEMENT - CONTINUED
0073 00
INSTALLATION
1.
Install three wires (11), (12) and (13) on amplitude select switch (8) with three screws (10).
NOTE
Tab of ring fits in notch of panel assembly to properly align amplitude select switch in panel assembly.
2.
Install amplitude select switch (8) on panel assembly (5) with ring (9), new lockwasher (4) and nut (6).
3.
Install panel assembly (5) on operator station (3) with two washers (2), seven washers (4) and nine screws (1).
1
4
3
1
4
5
2
1
401-446
4.
Close right-side door assembly (TM 5-3895-379-10).
5.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0073 00-3/(0073 00-4 Blank)
