TM 5-3895-379-23
WORK LIGHT CONTROL SWITCH REPLACEMENT - CONTINUED
0075 00
REMOVAL - CONTINUED
NOTE
Tag and mark all wires prior to removal.
4.
Remove screw (6), lockwasher (7) and wire (8) from light switch (9). Discard lockwasher.
5.
Loosen three screws (10) and remove three wires (11) from light switch (9).
6.
Remove screw (12) and knob (13) from light switch (9).
7.
Remove nut (13), light switch (9) and lockwasher (14) from panel assembly (5). Discard lockwasher.
12
5
14
13
15
9
11
NOTCH
POST
10
7
8
6
VIEW FROM DRIVER'S SEAT
401-463
INSTALLATION
NOTE
Post on light switch is positioned in notch of panel assembly to properly align light switch on panel assembly.
1.
Install light switch (9) on panel assembly (5) with new lockwasher (15) and nut (14). Tighten nut.
NOTE
Knob indicator is positioned on switch to point at lights selection icons. To find correct position, turn switch
to full-right position and position indicator to point toward icon furthest to the right.
2.
Install knob (13) on light switch (9) with screw (12). Tighten screw.
3.
Install three wires (11) on light switch (9) and tighten three screws (10).
4.
Install wire (8) on light switch (9) with screw (6) and new lockwasher (7).
0075 00-2
