TM 5-3895-379-23
VIBRATION CONTROL SWITCH REPLACEMENT - CONTINUED
0072 00
INSTALLATION
1.
Install three wires (11), (12) and (13) on vibration control switch (8) with three screws (10).
NOTE
Tab of ring fits in notch of panel assembly to properly align vibration control switch in panel assembly.
2.
Install vibration control switch (8) on panel assembly (5) with ring (9), lockwasher (7) and nut (6).
3.
Install panel assembly (5) on operator station (3) with two washers (2), seven washers (4) and nine screws (1).
1
4
3
1
4
5
2
1
401-446
4.
Close right-side door assembly (TM 5-3895-379-10).
5.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0072 00-3/(0072 00-4 Blank)
