TM 5-3895-379-23
ENGINE BLOCK HEATING ELEMENT REPLACEMENT- CONTINUED
0044 00
REMOVAL - CONTINUED
1.
Slide boot (1) on cable (2) back to expose two screws (3) and screw (4).
NOTE
Do not remove the screw holding the ground wire to the engine block heating element. The ground wire
can be removed without removing the screw.
Tag and mark all wires prior to removal.
2.
Remove two screws (3) and wires (5) from engine block heating element (6).
3.
Loosen screw (4) and remove wire (7) from engine block heating element (6).
5
6
1
2
3
4
5
401-388
NOTE
Position funnel to allow controlled draining of the engine block into a container with a minimum 1 qt (0.9 l)
capacity.
4.
Remove drain plug (8) from engine block fitting (9)
and engine block (10).
5.
Remove engine block heating element (6) from engine
block (10).
6.
Remove engine block fitting (9) from engine block
9
(10).
10
8
401-389
0044 00-2
