TM 5-3895-379-23
FUEL/WATER SEPARATOR ASSEMBLY MAINTENANCE - CONTINUED
0042 00
FUEL/WATER SEPARATOR ASSEMBLY INSTALLATION - CONTINUED
3.
For CB534B Roller, open fuel supply valves (1). For CB534C Roller, open fuel supply valves (2).
2
1
CB534C ROLLER
CB534B ROLLER
401-2186
CAUTION
The fuel injection pump needs fuel for lubrication. The precision parts of pump are easily damaged. For
this reason, engine must NOT be started until lubrication pump is full of fuel that is free of air.
The system must be primed any time any part of system is drained of fuel. For example, when fuel sys-
tem is changed or a fuel line is removed or when inspection cover on fuel injection pump is removed for
service or repair, fuel system must be primed (air removed).
4.
Prime fuel system (WP 0041 00).
5.
Lower operator platform assembly (WP 0128 00).
6.
Start engine and check for leaks (TM 5-3895-379-10).
7.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0042 00-12
