TM 5-3895-379-23
COLD START HEATER REPLACEMENT - CONTINUED
0043 00
INSTALLATION
1.
Install cold start heater (6) into intake manifold elbow (7). Tighten to 17-28 lb-ft (23-38 Nm).
2.
Install fuel line (4) into cold start heater nipple (5) and tighten nut (3) to 35-71 lb-ft (47-96 Nm).
3.
Connect wire (1) to cold start heater connection (2).
4.
Lower operator platform assembly (WP 0128 00).
5.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0043 00-3/(0043 00-4 Blank)
