TM 5-3895-379-23
FUEL/WATER SEPARATOR ASSEMBLY MAINTENANCE - CONTINUED
0042 00
CLEANING AND INSPECTION
1.
Wipe off all parts with cleaning cloth.
2.
Inspect fuel/water separator head fittings for cracks, nicks, dents and stripped threads. If damage is found, replace fuel/
water separator head.
3.
Inspect all plugs and washers for cracks, nicks, dents and stripped threads. Replace all damaged parts.
4.
Inspect nut, screw, cap and collar for cracks, nicks, dents and stripped threads. Replace all damaged parts.
5.
Inspect water separator bowl for cracks, nicks and dents. Replace if necessary.
6.
Inspect hoses and fittings for cracks, bends, nicks, dents, stripped threads and cuts. Replace all damaged parts.
FUEL/WATER SEPARATOR ASSEMBLY ASSEMBLY
CAUTION
28
30
Area around filter must be very clean. Any
contaminant entering filter element or fil-
31
ter assembly will damage equipment.
29
1.
Place fuel/water separator head (22) in a soft-jawed
22
vise.
2.
Install two new preformed packings (33) into connec-
32
tors (13 and 14).
3.
Install two seals (32) and connectors (13 and 14) in
13
fuel/water separator head (22).
4.
Install new preformed packing (31) and plug (30) in
33
fuel/water separator head (22). Tighten plug securely.
5.
Install two seals (29) and plugs (28) in fuel/water sep-
arator head (22). Tighten plugs securely.
32
14
401-385
0042 00-9
