TM 5-3895-379-23
FUEL/HYDRAULIC OIL TANK AND DRAIN LINES REPLACEMENT - CONTINUED
0038 00
DRAIN LINE INSTALLATION - CONTINUED
10
6.
Install new O-ring (9) and fuel tank connector (8) on
9
fuel tank (10).
7.
Install new O-ring (2) and hose assembly (4) on fuel
8
tank connector (8) with nut (7).
2
7
4
401-342
8.
Install new O-ring (2) and elbow (6) on hose assembly
(4).
4
9.
Install hose assembly (4) on frame assembly (5) with
2
nut (3).
10.
Install new O-ring (2) and fuel drain cap (1) on hose
6
assembly (4).
5
3
2
1
401-344
11.
Install air cleaner assembly (WP 0032 00).
12.
Lower operator platform assembly (WP 0128 00).
13.
Install fuel level sending unit (WP 0096 00).
14.
Fill fuel/hydraulic oil tank and check for leaks (WP 0037 00).
CAUTION
The fuel injection pump needs fuel for lubrication. The precision parts of the pump are easily damaged.
For this reason, the engine must NOT be started until the injection pump is full of fuel that is free of air.
The system must be primed any time any part of the system is drained of fuel. For example, when the
fuel system is changed or a fuel line is removed or when the inspection cover on the fuel injection pump
is removed for service or repair, the fuel system must be primed (air removed).
15.
Prime fuel system (WP 0041 00).
16.
Start engine and check for leaks (TM 5-3895-379-10).
17.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0038 00-26
