TM 5-3895-379-23
FUEL/HYDRAULIC OIL TANK AND DRAIN LINES REPLACEMENT - CONTINUED
0038 00
TANK INSTALLATION - CONTINUED
24.
Install hydraulic oil temperature sensor (30) in fuel/hydraulic oil tank (32). Tighten sensor to 26-33 lb-ft (35-45 Nm).
25.
Install two wires (31) on hydraulic oil temperature sensor (30) and tighten two screws (29) to 0.6-0.9 lb-ft (0.8-1.2 Nm).
30
32 29
31
401-348
26.
Install new O-ring (18) and hose assembly (28) on fuel/hydraulic oil tank connector (19) and tighten nut (27).
18
27
28
19
401-347
401-347
0038 00-22
