TM 5-3895-379-23
FUEL/HYDRAULIC OIL TANK AND DRAIN LINES REPLACEMENT - CONTINUED
0038 00
TANK INSTALLATION - CONTINUED
9.
Apply sealant to threads of vent (61) and install vent on fuel/hydraulic oil tank (32).
10.
Install strainer (60) into fuel/hydraulic oil tank (32).
11.
Lift lever (59) and turn hydraulic oil cap (58) clockwise until cap is secure on fuel/hydraulic oil tank (32).
12.
Install lock (57) on hydraulic oil cap (58).
59
58
61
57
32
60
401-353
NOTE
Ensure hydraulic oil level indicator is installed with HIGH readable at the top of the indicator and LOW
readable at the bottom of the indicator.
13.
Install two washers (55), four new preformed packings (56) and hydraulic oil level indicator (54) on fuel/hydraulic oil
tank (32) using two screws (53).
32
53
56
55
54
401-352
0038 00-17