TM 5-3895-379-23
FUEL/HYDRAULIC OIL TANK AND DRAIN LINES REPLACEMENT - CONTINUED
0038 00
TANK REMOVAL - CONTINUED
29.
Remove two nuts (69), washers (70), screws (71) and strap assemblies (67) from frame assembly (68).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device is in good condition and of suitable load capacity. Keep clear of heavy parts
supported only by lifting device. Failure to follow this warning may cause injury or death.
CAUTION
Place fuel/hydraulic oil tank on blocks and position tank so that connectors and hoses can be removed and
installed. Do not allow weight of tank to rest on connectors. Failure to follow this caution may cause damage
to tank and connectors.
NOTE
Fuel/hydraulic oil tank weighs 360 lb (163 kg).
Fuel/hydraulic oil tank must be pushed or pried toward rear of roller to allow fuel/hydraulic oil tank
bosses to clear cut-outs in frame assembly during removal.
30.
Attach a lifting device to lift points of fuel/hydraulic oil tank (32). Remove tank from frame assembly (68) with lifting
device while assistants pry tank free from frame assembly (68) and guide tank through ROPS (51).
51
LIFTING DEVICE
LIFTING
DEVICE
32
67
69
68
70
71
401-356
0038 00-12
