TM 5-3895-379-23
FIELD MAINTENANCE PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
Table 1. Field Preventive Maintenance Checks and Services (PMCS) for CB534 Roller - Continued.
LOCATION
ITEM TO
ITEM
MAN-
NOT FULLY MISSION
CHECK/
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
SERVICE
17
1,000 H or A
Water Spray
Drain and flush system (TM 5-3895-
System
379-10). Check for damaged parts.
Replace or service damaged parts.
18
1,000 H or A
Radiator
Replace radiator cap as needed.
19
1,000 H or A
Fuel Tank
Drain tank and flush out sediment (WP
NOTE
Refer to DA Pam 738-750 for sampling requirements.
After expiration of warranty, active and reserve Army Fields and
National Guard activities will send a hydraulic oil sample to an
AOAP laboratory for analysis once a year.
Intervals for sampling as well as draining and refilling lubri-
cants may be changed by an AOAP laboratory.
If AOAP laboratory support is not available, change hydraulic
20
A
Hydraulic Oil Take hydraulic oil sample for AOAP
21
1,000 H or B
Engine
22
2,000 H or A
Engine
Breather
Tube
23
2,000 H or B
Radiator
for leaks or loose hoses. Check for
excessive corrosion.
24
2,000 H or B
Water Spray
Thoroughly clean water spray system
System
lines, valves, drain cocks, spray bars,
water tanks, screens, and nozzles.
Check for damaged parts. Replace any
damaged parts.
a. Check and service water spray sys-
tem (TM 5-3895-379-10).
b. Check and service water spray
screen (TM 5-3895-379-10).
c. Check and service water spray noz-
zles (TM 5-3895-379-10).
END OF WORK PACKAGE
0009 00-5/(0009 00-6 Blank)