TM 5-3895-379-23
ENGINE LIFTING PLATES REPLACEMENT - CONTINUED
0010 00
INSTALLATION
1.
For CB534C Roller only, install right engine lifting bracket (15) and two screws (14) to cylinder head (3).
2.
For CB534B Roller only, install right engine lifting bracket (13) and clip (12) on cylinder head (3) with three washers
(11) and screws (10). Tighten screws to 33-47 lb-ft (45-64 Nm).
3.
For CB534B Roller only, attach lifting bracket (13) to radiator bracket (8) with grommet (9), washer (6), washer (5),
bolt (7), washer (6), washer (5) and new locknut (4). Tighten locknut to 33-47 lb-ft (45-64 Nm).
4.
Install left engine lifting plate (2) on cylinder head (3) with two screws (1). Tighten screws to 33-47 lb-ft (45-64 Nm).
3
2
1
LEFT ENGINE LIFTING PLATE
401-237
5.
Lower operator platform assembly (WP 0128 00).
END OF WORK PACKAGE
0010 00-3/(0010 00-4 Blank)
