TM 5-3895-379-23-2
0278
INSPECTION
1.
Check tee for clogging, corrosion, or excessive wear.
2.
Check drain cock and valve for clogging, corrosion, excessive wear, and obvious signs of damage.
3.
Check all parts for stripped or damaged threads.
4.
Replace all damaged parts.
END OF TASK
INSTALLATION
1.
Apply sealing compound to threads and install valve (Figure 3, Item 1) and drain cock (Figure 3, Item 4) in tee
(Figure 3, Item 2).
2.
Install two adapters (Figure 3, Item 3) and tee (Figure 3, Item 2) on valve (Figure 3, Item 1) (CB534B Roller).
1
2
3
3
4
M1222SWR
Figure 3. Side Drain Cock and Valve Installation.
3.
Install tee (Figure 4, Item 7) and two clips (Figure 4, Item 4) on frame assembly (Figure 4, Item 5) with two
washers (Figure 4, Item 8) and bolts (Figure 4, Item 9). Tighten bolts to 33-47 lb-ft (45-64 Nm).
4.
Position two water lines (Figure 4, Item 2) on adapters (Figure 4, Item 3) and tighten nuts (Figure 4, Item 1).
5.
Ensure that drain cock (Figure 4, Item 6) is closed.
03/15/2011Rel(1.8)root(maintwp)wpno(M00216)