TM 5-3895-379-23-2
0277
INSTALLATION - Continued
WARNING
Use caution when installing cover on bumper assembly. Failure to follow this warning may
cause injury.
5.
Install cover (Figure 8, Item 3) on bumper assembly (Figure 8, Item 4) with four washers (Figure 8, Item 1) and
bolts (Figure 8, Item 2). Tighten bolts to 15-25 lb-ft (20-34 Nm).
4
3
1
2
M0273SWR
Figure 8. Drain Cock and Tee Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill water spray system. (TM 5-3895-379-10)
2.
Start engine, operate water spray system, and check for leaks. (TM 5-3895-379-10)
3.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0277-7/8 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00215)