TM 5-3895-379-23-2
0257
REMOVAL
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury.
NOTE
Use drain pan with 2 qt (1.9 Liters) minimum capacity to catch any hydraulic oil that may drain
from system.
Remove hydraulic oil filter (Figure 1, Item 2) from hydraulic oil filter assembly (Figure 1, Item 1) and allow
remaining hydraulic oil to drain. Dispose of oil IAW local policy and ordinances. Ensure all spills are cleaned
up.
1
INSTALL
REMOVE
2
M0826SWR
Figure 1. Hydraulic Oil Filter Removal.
END OF TASK
CLEANING AND INSPECTION
1.
Clean filter assembly base (Figure 2, Item 1) and ensure that all old gasket material is removed.
03/15/2011Rel(1.8)root(maintwp)wpno(M00195)