TM 5-3895-379-23-2
0244
ASSEMBLY - Continued
22.
Install flatwasher (Figure 21, Item 6) and gear assembly (Figure 21, Item 7) on upper housing assembly
(Figure 21, Item 5).
WARNING
Upper housing assembly is under spring tension. Wear eye protection and use caution when
removing upper housing assembly. Failure to follow this warning may cause injury.
NOTE
Rod of shock absorber must be fully extended to align hole for installation of rods.
Ensure that square shoulder of drive shaft is fully seated in square hole of upper housing
assembly before installing push-on nut.
23.
While assistant compresses seat suspension assembly (Figure 21, Item 4), install drive shaft
(Figure 21, Item 1) in upper housing assembly (Figure 21, Item 5), arm (Figure 18, Item 4), and shock absorber
(Figure 15, Item 5) with new push on nut (Figure 21, Item 3).
2
3
1
1
7
4
5
6
3
M0799SWR
Figure 21.
Seat Suspension Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00182)