TM 5-3895-379-23-2
0244
ASSEMBLY - Continued
2.
Install spring pin (Figure 15, Item 8) in lower housing assembly (Figure 15, Item 3) allowing pin to protrude
from front of lower housing assembly.
3.
Install two bumper assemblies (Figure 15, Item 1) in lower housing assembly (Figure 15, Item 3).
4.
Install two roller pads (Figure 15, Item 2) in lower housing assembly (Figure 15, Item 3).
5.
Install two sleeve bearings (Figure 15, Item 6) in shock absorber (Figure 15, Item 5).
6.
Install shock absorber (Figure 15, Item 5) on lower housing assembly (Figure 15, Item 3) with bolt
(Figure 15, Item 4) and new locknut (Figure 15, Item 7). Tighten locknut to 84-192 lb-in. (19-22 Nm).
2
0.60 TO 0.66 IN
3
(15.2 TO 16.8 MM)
1
8
2
4
6
5
7
6
M0793SWR
Figure 15.
Seat Suspension Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00182)