TM 5-3895-379-23-2
0236
REMOVAL
WARNING
Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped.
Serious injury can be caused if this pressure is not released before any service is done on
the hydraulic system.
CAUTION
Cap and plug all lines and fittings immediately to prevent any contaminants from entering
the system.
Tag all hydraulic lines and electrical wires as they are removed or disconnected.
NOTE
Tag and mark all hydraulic lines as they are removed for installation purposes. Cap and plug
all lines and fittings to prevent any contaminants from entering the system.
1.
Release pressure in hydraulic system by slowly loosening the fill cap on the top of the hydraulic oil tank.
2.
Disconnect wiring harnesses (Figure 1, Items 3 and 4).
3.
Remove two nuts (Figure 1, Item 1) and clamp (Figure 1, Item 2).
1
2
3
4
M0746SWR
Figure 1.
Operator Platform and Operator Station Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00174)
