TM 5-3895-379-23-2
0230
INSTALLATION
1.
Install bracket (Figure 2, Item 3), four washers (Figure 2, Item 5), screws (Figure 2, Item 4), and nuts
(Figure 2, Item 1) on plate (Figure 2, Item 8). Tighten nuts to 15-25 lb-ft (20-34 Nm).
2.
Install plate (Figure 2, Item 8) on bumper assembly (Figure 2, Item 9) with four screws (Figure 2, Item 6) and
washers (Figure 2, Item 7). Tighten screws to 15-25 lb-ft (20-34 Nm).
3.
Install strap (Figure 2, Item 2) in bracket (Figure 2, Item 3).
1
2
3
7
4
6
8
5
9
9
M1310SWR
Figure 2. Decontamination Kit Bracket Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install decontamination kit.
2.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0230-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00168)