TM 5-3895-379-23-2
0228
INSTALLATION - Continued
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
3.
Attach lifting straps using a lifting device to position yoke (Figure 8, Item 7) on roller.
4.
Install guide bolts (Figure 8, Item 1).
NOTE
Weight of plate is 85 lb (39 kg).
Shims are positioned between plate and yoke.
5.
With assistance, position bottom plate (Figure 8, Item 3) on yoke (Figure 8, Item 7).
6.
Install original amount of shims (Figure 8, Item 4) on bottom plate (Figure 8, Item 3) and install two bolts
(Figure 8, Item 2). Remove guide bolts and install two top bolts (Figure 8, Item 2).
7.
Install original amount of shims (Figure 8, Item 4) on bottom plate (Figure 8, Item 3) and install washers
(Figure 8, Item 6) and bolts (Figure 8, Item 5).
1
2
1
3
4
5, 6
7
M0715SWR
Figure 8.
Yoke Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00166)
