TM 5-3895-379-23-1
0213
DRAIN
NOTE
Front and rear propel gearboxes are serviced the same way. Front propel gearbox is shown.
1.
Move roller (Figure 1, Item 1) until level check plug (Figure 1, Item 2) is located at 12 o'clock position and fill
plug (Figure 1, Item 4) is located at 3 o'clock position.
2.
Turn engine off (TM 5-3895-379-10).
3.
Loosen oil level check plug (Figure 1, Item 2) at 12 o'clock position through access hole.
4.
Start engine (TM 5-3895-379-10).
5.
Move roller (Figure 1, Item 1) until oil level check plug (Figure 1, Item 2) is at 6 o'clock position.
6.
Turn engine off (TM 5-3895-379-10).
12
1
2
3
4
3
9
6
POSITION FOR
CHECKING SHOWN
M0393SWR
Figure 1. Propel Gearbox Service.
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury.
NOTE
Use drain pan to catch any hydraulic oil that may drain from system. Dispose of oil IAW local
policy and ordinances. Ensure that all spills are cleaned.
7.
Place container with 1 gal (3.8 Liters) minimum capacity under gearbox to catch draining oil.
8.
Remove oil level check plug (Figure 2, Item 3) and fill plug (Figure 2, Item 2) from gearbox (Figure 2, Item 4).
9.
Allow oil to drain completely from gearbox (Figure 2, Item 4).
10.
Clean and inspect oil level check plug (Figure 2, Item 3) and fill plug (Figure 2, Item 2).
03/15/2011Rel(1.8)root(maintwp)wpno(M00151)
