TM 5-3895-379-23-1
0211
DISASSEMBLY
1.
Remove three screws (Figure 1, Item 4) and boot clamp (Figure 1, Item 5) from valve body (Figure 1, Item 9).
2.
Remove three screws (Figure 1, Item 2), pivot bracket (Figure 1, Item 3), plate (Figure 1, Item 15), and gasket
(Figure 1, Item 14) from valve body (Figure 1, Item 9). Discard gasket.
3.
Remove two screws (Figure 1, Item 8) and switches (Figure 1, Item 7) from pivot bracket (Figure 1, Item 3).
4.
Remove two metering fittings (Figure 1, Item 13), preformed packing (Figure 1, Item 10), O-ring
(Figure 1, Item 11), and backup ring (Figure 1, Item 12) from valve body (Figure 1, Item 9). Discard preformed
packing, backup ring, and O-ring.
5.
Remove two plungers (Figure 1, Item 1) and preformed packings (Figure 1, Item 6) from valve body
(Figure 1, Item 9). Discard preformed packings.
3
1
2
4
1
5
6
6
8
7
15
7
14
9
10
11
12
13
M0391SWR
Figure 1. Propel and Speed Control Valve Disassembly.
END OF TASK
ASSEMBLY
1.
Install two new preformed packings (Figure 2, Item 6) and plungers (Figure 2, Item 1) on valve body
(Figure 2, Item 9).
03/15/2011Rel(1.8)root(maintwp)wpno(M00149)