TM 5-3895-379-23-1
0208
ADJUSTMENT - Continued
5.
Start engine, move roller and operate vibratory system (TM 5-3895-379-10).
6.
If there is not enough friction on propel control lever to hold lever in position while vibratory system is operating,
turn off vibratory system, stop roller, turn engine off (TM 5-3895-379-10), and repeat Step (1) until adequate
friction is obtained.
END OF TASK
END OF WORK PACKAGE
0208-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00146)