TM 5-3895-379-23-1
0199
INSPECTION AND TESTING
Wiring and electrical inspection and repair is presented in General Wiring Repair (WP 0195). Electrical testing is
presented in Electrical General Maintenance Instructions (Volume 2, WP 0280).
END OF TASK
REMOVAL
NOTE
The instrument wiring harness for the CB534B and CB534C Rollers are replaced the
same way. CB534B Roller is shown.
The CB534C Roller is equipped with additional wiring.
1.
Remove two shoulder screws (Figure 1, Item 1), washers (Figure 1, Item 2), and vandal guard
(Figure 1, Item 3) from instrument box assembly (Figure 1, Item 4).
2.
Remove three screws (Figure 1, Item 5) and washers (Figure 1, Item 6) from operator station
(Figure 1, Item 7).
3.
Lift and tilt back instrument box assembly (Figure 1, Item 4) to gain access to back of instrument box assembly.
3
2
1
7
6
5
4
M0327SWR
Figure 1. Instrument Wiring Harness Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00137)