TM 5-3895-379-23-1
0198
INSTALLATION
NOTE
Install electrical tiedown straps as required.
1.
Position wiring harness in frame assembly and yoke assembly.
2.
Install two wires (Figure 12, Item 1) on right-rear work light assembly (Figure 12, Item 3) and tighten two screws
(Figure 12, Item 2).
3.
Install right-rear work light assembly (Figure 12, Item 3), screw (Figure 12, Item 6), and nut
(Figure 12, Item 4) on bracket (Figure 12, Item 5).
1
2
3
6
5
4
M1269SWR
Figure 12. Rear Wiring Harness Installation.
4.
Install support (Figure 13, Item 6), washer (Figure 13, Item 2), screw (Figure 13, Item 1), two washers
(Figure 13, Item 5), and screws (Figure 13, Item 4) on support (Figure 13, Item 3).
03/15/2011Rel(1.8)root(maintwp)wpno(M00136)