TM 5-3895-379-23-1
0170
REMOVAL
NOTE
Vibrations Per Minute (VPM) tachometer for the CB534B and CB534C Rollers are
replaced in the same way.
CB534C Roller is equipped with a Feet Per Minute (FPM) meter.
1.
Remove two shoulder screws (Figure 1, Item 1), washers (Figure 1, Item 2), and vandal guard
(Figure 1, Item 3) from instrument box assembly (Figure 1, Item 4).
2.
Remove three screws (Figure 1, Item 5) and washers (Figure 1, Item 6) from operator station
(Figure 1, Item 7).
3.
Lift and tilt back instrument box assembly (Figure 1, Item 4) to gain access to back of instrument box assembly.
3
2
1
7
6
5
4
M0912SWR
Figure 1.
VPM Tachometer and FPM Meter Removal.
4.
Remove light fixture (Figure 2, Item 2) from VPM tachometer (Figure 2, Item 1).
5.
Remove retainer clip (Figure 2, Item 3) from light fixture (Figure 2, Item 2).
6.
Push and twist light bulb (Figure 2, Item 4) counterclockwise and remove light bulb from light fixture
(Figure 2, Item 2).
7.
If damaged, cut wire and install new light fixture (Figure 2, Item 2) using general wiring repair (WP 0195).
03/15/2011Rel(1.8)root(maintwp)wpno(M00108)