TM 5-3895-379-23-1
FIELD MAINTENANCE
FUSE AND FUSE HOLDER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
TM 5-3895-379-23P, Figures 48 and 103
(Volume 2, WP 0289, Table 1, Item 39)
Equipment Condition
Engine off. (TM 5-3895-379-10)
Materials/Parts
Drums chocked. (TM 5-3895-379-10)
Solder Tin Alloy (WI)
Battery disconnect switch in OFF position.
(Volume 2, WP 0288, Table 1, Item 66)
(TM 5-3895-379-10)
Tag, Marker
Right-side door assembly opened.
(Volume 2, WP 0288, Table 1, Item 70)
(TM 5-3895-379-10)
Personnel Required
Construction Equipment Repairer 91L
REMOVAL
NOTE
All fuse and fuse holders are replaced the same way. One fuse and fuse holder is shown.
1.
Remove fuse holder assembly cap (Figure 1, Item 1) from fuse holder assembly (Figure 1, Item 4).
2.
Remove fuse (Figure 1, Item 3) and seal (Figure 1, Item 2) from fuse holder assembly cap (Figure 1, Item 1).
Discard seal.
1
2
3
4
STEERING WHEEL SHOWN REMOVED FOR CLARITY
M0887SWR
Figure 1. Fuse and Fuse Holder Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00102)
