TM 5-3895-379-23-1
0127
FUEL FILTER ASSEMBLY ASSEMBLY
CAUTION
Area around filter element must be very clean. Any contaminants entering fuel filter assembly
will cause damage to equipment.
1.
Place fuel filter assembly (Figure 10, Item 6) on a clean work bench.
2.
Remove shipping plug from filter element (Figure 10, Item 4).
3.
Install new seal (Figure 10, Item 5), filter element (Figure 10, Item 4), and ring (Figure 10, Item 3) on fuel filter
(Figure 10, Item 6).
NOTE
Note position of connector before installation.
4.
Install bolt (Figure 10, Item 1), washer (Figure 10, Item 11), connector (Figure 10, Item 2), and washer
(Figure 10, Item 11) in fuel filter assembly (Figure 10, Item 6).
5.
Install plug (Figure 10, Item 10) in fuel filter assembly (Figure 10, Item 6).
6.
Install preformed packing (Figure 10, Item 9), cap (Figure 10, Item 7), and barrel nut (Figure 10, Item 8) on
fuel filter assembly (Figure 10, Item 6).
1
3
2
11
10
9
4
8
5
6
7
M0559SWR
Figure 10. Fuel Filter Assembly Assembly.
END OF TASK
FUEL FILTER ASSEMBLY INSTALLATION
1.
If removed, install bracket (Figure 11, Item 6) with two screws (Figure 11, Item 4) on engine block
(Figure 11, Item 5).
2.
Install fuel filter assembly (Figure 11, Item 8), clip (Figure 11, Item 1), and hose (Figure 11, Item 3) on bracket
(Figure 11, Item 6) with two screws (Figure 11, Item 2) and nuts (Figure 11, Item 7).
03/15/2011Rel(1.8)root(maintwp)wpno(M00065)
