TM 5-3895-379-23-1
0115
FUEL INJECTOR LINES AND FITTINGS REMOVAL
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near
fire, flames, or sparks. Fuel may ignite, causing injury or death, or damage to machine.
Fuel is very slippery. Immediately wipe up any spills. Failure to follow this warning may
cause injury.
CAUTION
Cap or plug all openings immediately to prevent contamination. Contamination may cause
damage to the equipment.
1.
Remove fuel filter assembly (WP 0127).
2.
Disconnect four fuel injection lines (Figure 3, Item 3) from fuel injection nozzles (Figure 3, Item 2).
NOTE
Secure fittings with a wrench when removing fuel injection lines at the fuel injection pump.
3.
Disconnect four fuel injection lines (Figure 3, Item 3) from fuel injection pump (Figure 3, Item 7).
4.
Remove four fuel injection lines (Figure 3, Item 3) from roller.
5.
Remove bolt (Figure 3, Item 5), three bolts (Figure 3, Item 6), and eight washers (Figure 3, Item 4) from fuel
return line (Figure 3, Item 1).
6.
Remove fuel return line (Figure 3, Item 1).
0115-6
03/15/2011Rel(1.8)root(maintwp)wpno(M00053)
