TM 5-3895-379-23-1
0080
REMOVAL - Continued
NOTE
Sleeves may stay with mount assembly.
4.
Remove two nuts (Figure 3, Item 6), washers (Figure 3, Item 5), bolts (Figure 3, Item 1), washers
(Figure 3, Item 2), and spacer sleeves (Figure 3, Item 7) from front engine mount (Figure 3, Item 11) and
frame assembly (Figure 3, Item 4).
5.
With assistance, use a lifting device to raise engine (Figure 3, Item 8) until there is space between resilient
mount (Figure 3, Item 3) and front engine mount (Figure 3, Item 11) or frame assembly (Figure 3, Item 4).
WARNING
Do not place fingers between engine mount and frame assembly. Shifting engine may cause
injury.
6.
Remove four screws (Figure 3, Item 10), washers (Figure 3, Item 9), front engine mount (Figure 3, Item 11),
two resilient mounts (Figure 3, Item 3), and remaining spacer sleeves (Figure 3, Item 7) from engine
(Figure 3, Item 8) and frame assembly (Figure 3, Item 4).
0080-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00019)