TM 5-3895-379-23-1
0079
REMOVAL
WARNING
Use caution and allow engine to cool before removal of component. Failure to follow this
warning may cause injury.
NOTE
Engine lifting plates are replaced the same way for CB534B and CB534C Rollers except
where noted. CB534B Roller is shown.
1.
Remove two screws (Figure 1, Item 3) and left engine lifting plate (Figure 1, Item 2) from cylinder head
(Figure 1, Item 1).
1
2
3
LEFT ENGINE LIFTING PLATE
M0051SWR
Figure 1. Engine Lifting Plates Removal.
2.
For CB534B Roller, remove nut (Figure 2, Item 12), washer (Figure 2, Item 3), washer (Figure 2, Item 4), bolt
(Figure 2, Item 2), washer (Figure 2, Item 3), washer (Figure 2, Item 4), and grommet (Figure 2, Item 5) from
radiator bracket (Figure 2, Item 1).
3.
For CB534B Roller, remove three screws (Figure 2, Item 10), washers (Figure 2, Item 11), clip
(Figure 2, Item 9), and right engine lifting bracket (Figure 2, Item 13) from cylinder head (Figure 2, Item 6).
4.
For CB534C Roller, remove two screws (Figure 2, Item 8) and right engine lifting bracket (Figure 2, Item 7)
from cylinder head (Figure 2, Item 6).
03/15/2011Rel(1.8)root(maintwp)wpno(M00018)
