TM 5-3895-379-23-1
0031
MALFUNCTION
Starter Relay or Starter Faulty.
CORRECTIVE ACTION
1.
Turn battery disconnect switch to OFF position (TM 5-3895-379-10).
2.
Remove nut, washer, and wire 304-WH (to starter) from starter relay switch assembly.
3.
Turn battery disconnect switch to ON position (TM 5-3895-379-10).
4.
Touch positive (+) probe of multimeter to terminal 1 (wire 306-GN) of starter relay switch assembly.
5.
Touch negative (-) probe of multimeter to good ground.
6.
Have assistant turn and hold engine start switch to START position (TM 5-3895-379-10) for no
more than 30 seconds.
7.
Measure voltage.
8.
Turn engine start switch to OFF position (TM 5-3895-379-10).
9.
Voltage should drop to zero VDC.
a.
If voltage does not drop to zero VDC, replace starter (WP 0152).
b.
If voltage does not drop to zero VDC, replace starter relay switch assembly (WP 0153).
STARTER RELAY
WIRE 306-GN
WIRE 200-BK
WIRE
109-OR
OUTPUT
TERMINAL
WIRE
304-WH
INPUT TERMINAL
T00095SWR
Figure 2.
Starter Relay Wiring.
END OF WORK PACKAGE