TM 5-3895-379-10
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0012 00
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for DSWR - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
e. Close left-side door assembly (WP
7
Before
0.1 Hours Fuel/Water
(Con't)
Separator
(Primary)
NOTE
Hydraulic oil is checked cold and warm.
Roller must be on level surface to have accurate level reading.
Check that hydraulic oil level is
8
Before
0.2 Hours Hydraulic
between the high and low marks on the
Oil Level
label beside the hydraulic oil tank sight
(Cold Oil
gauge. If level is below "LOW" level
Check)
mark, fill hydraulic tank with hydrau-
lic oil (WP 0019 00).
9.1
Before
Rear Water
Check level of water as indicated in
Tank
water level gauge. Ensure tank is full
before operating roller (WP 0024 00).
9
Before
Work Lights
Check rear work lights for broken
lenses.
HYDRAULIC OIL
PADLOCK
TANK FILL CAP
HYDRAULIC OIL
TANK SIGHT GAUGE
LABEL
401-024
0012 00-4
