SECTION 9
STEERING
c. Position gasket, spacer and "W" shaped gasket
seal In front cover recesses.
d. Assemble front and rear cover to the body, being
careful that the "W" gasket seal retains its position in the
recess of the front cover. Tighten capscrews to specified
CAUTION: The pump rotation is identified by arrow
stamped on the pump body. When
assembling the pump, the front cover (drive
end of the pump) should be located on the
"arrow" end.
9-60.
INSTALLATION.
a. Tighten the mounting bolts securely.
b. Make certain all hydraulic fittings are tightened.
c.
Bleed the system as specified in paragraph 9-
83.
CAUTION: Check for abnormal hot spots.
If any
particular area is hot, disassemble and
inspect.
9-61.
FLOW DIVIDER (DETROIT DIESEL).
FIGURE 9-91.
9-62.
DESCRIPTION (see figure 9-92).
FIGURE 9-92.
9-26.