SECTION 9
STEERING
across port face with control end up. Remove and set
aside four (4) capscrews (see figure 9-1 5).
f. Hold spool assembly down against block in vise
and lift off end cap (see figure 9-16).
g. Inspect mating surfaces for obvious leakage path,
wear, seal condition (see figure 9-17).
h. Remove cap locator bushing (see figure 9-18).
i. Place housing on solid surface with port face down
so that it can be held securely and remove spool-sleeve
assembly from the 14 hole end of housing (see figure 9-
19).
FIGURE 9-14.
FIGURE 9-15.
FIGURE 9-17.
FIGURE 9-16.
FIGURE 9-18.
9-7.
