SECTION 10
BRAKES AND REAR WHEELASSEMBLY
NOTE: It will be easier to reach the bleed
screws if a long reach 7/16 inch wrench
is used.
d. Repeat step c for all bleed screws.
10-45. WHEEL BRAKE CYLINDERS (see
There are four (4) wheel brake cylinders. For
removal refer to WHEEL BRAKES - Removal
and Disassembly.
FIGURE 10-10.
FIGURE 10-9.
10-46. CENTER WHEEL.
NOTE: To remove the center wheel, the left
FIGURE 10-11.
rear wheel assembly must be removed
as described under OUTSIDE REAR
WHEELS - Removal.
10-47. CENTER WHEEL REMOVAL.
a. After removing the left rear wheel
assembly, remove the wheel nuts and the
center wheel.
b. Remove the mounting pin capscrews (see
figure 10-10) and remove the pins (see figure
c. Remove the wheel support bracket with
the spring, pin and pivot block.
d. Remove the thrust washers.
10-48. DISASSEMBLY.
FIGURE 10-12.
10-7.