SECTION 4
MAINTENANCE
4-1.
GENERAL.
hours per day, the hourly schedule should be
followed. If the unit is operated less than eight
4-2. This section contains instructions neces-
(8) hours per day, the periodic schedule should
sary for proper HYSTER-CARE Maintenance of
be followed.
the C530A Compactor. HYSTER-CARE Mainte-
n a n c e is divided into two (2) subsections:
4-6. The maintenance checks given In Table
H Y S T E R - C A R E Maintenance Schedule and
4-1 are listed in systematic order within each
HYSTER-CARE Maintenance Procedures. The
time interval, starting with the eight (8) hour
HYSTER-CARE Maintenance Schedule lists the
checks and are in the same order as the
recommended time intervals between mainte-
m a i n t e n a n c e decal located on the left-hand
nance checks. The HYSTER-CARE Maintenance
side of the front unit. The last column of Table
P r o c e d u r e s provide detailed instructions for
4-1 should be used to locate the applicable
performing the maintenance checks. The
maintenance procedure. Figure 4-1 shows the
i n s t r u c t i o n s listed in the procedures sub-
location of all maintenance points.
s e c t i o n are given by systems and are not
necessarily in the order listed in Table 4-1.
HYSTER-CARE MAINTENANCE
4-7.
PROCEDURES.
4-3.
HYSTER-CARE MAINTENANCE
SCHEDULE.
4-8. MISCELLANEOUS LUBRICATION.
4-4. HYSTER-CARE Maintenance is a planned
4-9. Miscellaneous parts such as rod ends,
m a i n t e n a n c e program that includes periodic
small bushings and hinges should be lubricated
inspection a n d lubrication. HYSTER-CARE
with a few drops of SAE 30 engine oil. Always
Maintenance should be correlated closely with
w i p e the area to be lubricated clean before
the operating hours recorded on the hourmeter
adding oil. Wipe away any excess lubricatlon.
located on the instrument panel.
NOTE: Excessive lubrication is wasteful and
4-5. Table 4-1 lists the recommended mainte-
often as damaging as lack of lubrica-
nance checks. It is listed in two (2) schedules:
tion. A n a l y z e e a c h l u b e p o i n t t o
the hourly schedule and the periodic schedule.
d e t e r m i n e the. amount of lubricatlon
I f the unit is operated more than eight (8)
necessary. Keep the machine clean and
FIGURE 4-1. MAINTENANCE CHART.
4-1.