TM 5-3895-346-14
STARTING MOTOR
ENGINE OVERHAUL
Check the starting motor, if required, in accordance with the Delco-Remy "Cranking Circuit" maintenance
handbook.
Install Starting Motor
To install the starting motor, reverse the procedure outlined for removal.
Tighten the 5/8-11 starter attaching bolts to 137-147 lb ft torque.
Keep all of the electrical connections clean and tight. When installing wiring terminal leads to the starting
motor and the solenoid switch, tighten the No. 10-32 connections to 16-30 lb in. torque and the 1/2 x 13
connections to 20-25 lb ft torque.
379