TM 5-3895-346-14
ENGINE OVERHAUL
FUEL STRAINER AND FILTER
Filter Replacement
A 1-inch-diameter twelve-point nut on the bottom of the filter is provided to facilitate removal and installation.
Replace the filter as follows:
1. Unscrew the filter or strainer and discard it.
2. Fill a new filter replacement cartridge about two-thirds full with clean fuel oil. Coat the seal gasket lightly
with clean fuel oil.
3. Install the new filter assembly and tighten it to one-half of a turn beyond gasket contact.
4. Start the engine and check for leaks.
255