Figure 1. Removing Front Balance Weight (Pulley Type)

TM-5-3895-346-14 - index
Page Navigation
164

TM 5-3895-346-14

ENGINE OVERHAUL

ENGINE BALANCE

Wedge a clean rag between the gears. Refer to Fig. 1 Camshaft and Bearings and tighten the

gear retaining nuts to 300-325 lb ft (407-441 Nm) torque. Then tighten the front balance weight

retaining nuts to 300-325 lb ft (407-441 Nm) torque. Remove the rag from the gears.

Figure 1. Removing Front Balance

Weight (Pulley Type)

165

Privacy Statement
Press Release
Contact