TM 5-3895-346-14
ENGINE OVERHAUL
CYLINDER LINER
13.
Install new compression gaskets and water and oil seals as outlined in Cylinder Head. Then install
the cylinder head and any other parts that were removed from the engine.
14.
After the engine has been completely reassembled, refer to the Lubricating Oil Specifications and
refill the crankcase to the proper level on the dipstick.
15.
Close all the drains and fill the cooling system.
16.
If new parts such as pistons, rings, cylinder liners, or bearings were installed, operate the engine on
the Run-in schedule.
163
