1
Top cover
6
Spacer
2
Screws, hex hd, 1/2 -13NC x 1 1/4 (22 req'd)
7
Support
3
Washers, lock, std, 1/2 (34 req'd)
8
Bracket
4
Nuts, hex, 1/2-13NC (34 req'd)
9
Bolts, carriage, 1/2-13NC x 1 1/4 (22 req'd)
5
Operator's platform
Figure 74. Top cover and operator's platform disassembled.
d. Installation.
(1)
Install the supports (7) and brackets (8) and tighten the carriage bolts (9), lockwashers (3), and nuts (4).
(2)
Position the operator's platform (5) over the supports (7) and top cover (1) and see that all mounting holes
are properly alined.
(3)
Lift up the operator's platform (5) and insert the spacers (6) between the platform and supports (7). Make
sure that the square mounting holes in the spacers, operator's platform, and supports are properly alined.
(4)
Install and tighten the carriage bolts (9), lockwashers (3), and nuts (4) attaching the operator's platform (5)
to the supports (7).
186
