1
Brake pedal bracket
16 Bolts, hex head, -13 NC x 2
2
Ratchet chain sash, 18 in. long
(4 req'd)
(1 req'd)
17 Brake shaft bracket
3
Brake ratchet
18 Brake control shaft
4
Cotter pin, 1/16 x 3/4
19 Left brake arm
5
Brake pedal
20 Pins, headed, (6 req'd)
6
Pin, cotter, 3/16 x 1 (6 req'd)
21 Swivel pin
7
Yoke
22 Pins, cotter, 3/16 x 1 (4 req'd)
8
Nuts, Jam, hex, 3/4-10 NC (4 req'd)
28 Adjusting rod yoke
9
Brake rod
24 Nuts, jam, hex, 1/2-13 NC (2 req'd)
10
Return spring
25 Adjusting rod
11
Spring clip
26 Brake arm
12
Right brake arm
27 Nuts, Jam, hex, 3/8-16 NC (2 req'd)
13
Brake shaft bearing
28 Screws, set, sq head, cup point,
14
Nuts, hex, -13 NC (4 req'd)
3/8-16 NC x 3/4 (2 req'd)
15
Washers, lock, std, (4 req'd)
29 Brake ratchet pin
Figure 63. Brake linkage disassembled.
(25) must be shortened. If the brake is too loose, the rod must be lengthened.
b. Adjustment.
(1) Remove the cotter pin (6) and pin (20) connecting the adjusting rod (25) with the brake arm (26).
(2) Disconnect the adjusting rod yoke (23) from the brake arm (26).
(3) Loosen the jam nut (24) on the adjusting rod (25).
160