(b) Install the jam nuts (8) on both ends of the right brake rod (9).
(c) Install yokes (7) on tile brake rod (9). Do not tighten the jam nuts (8), as the length of the brake rod
must be adjusted during installation.
(d) Connect the spring (10) with the spring clip (11).
(4) Left brake rod.
(a) Install the jam nuts (8) on both ends of the left brake rod (9).
(b) Install yokes (7) on the left brake rod (9). Do not tighten the jam nuts (8), as the length of the brake
rod must be adjusted during installation.
(5) Adjusting rod. The adjusting rod is reassembled in the same manner as the left brake rod.
f. Installation.
(1) Position the brake control shaft (18) assembly in its proper place on the floor and install the brake shaft
brackets (17).
(2) Install bolts (16), lockwashers (15), and nuts (14). Tighten the bolts securely.
(3) Connect the right rod yoke (7) with the right brake pedal (5).
(4) Install the right rod yoke pin (20) and cotter pin (6). Secure the cotter pin (6).
(5) Turn the lower right rod yoke (7) clockwise or counter- clockwise and adjust the rod (9) to proper length.
The adjustment is correct when there is no appreciable play in the linkage.
(6) Connect the lower right rod yoke (7) with the right brake shaft arm (12) and install the pin (20) and cotter pin
(6).
(7) Tighten the jam nut (8) and connect the spring (10) with the hook on the bottom part of the driver's platform.
(8) Connect the upper left rod yoke (7) with the left brake pedal (5) and install the pin (20) and cotter pin (6).
(9) Turn the lower left rod yoke (7) clockwise or counterclockwise and adjust the left rod (9) to proper length.
The adjustment is correct when there is no appreciable play in the linkage.
(10) Connect the lower left rod yoke (7) with left brake shaft arm (19) and install pin (20) and cotter pin (6).
(11) Tighten the jam nut (8).
(12) Connect the adjusting rod (25) with the brake shaft left arm (19) and brake arm (26) in the same manner as
the left brake rod.
(13) Adjust brake (par. 147).
(14) Start the engine and check brake and brake linkage for proper operation.
163
