Tech-
nical
Service
inspec-
tion
Monthly Weekly
DRIVE SYSTEM--Continued
111
111
Tighten or replace loose or worn mounting bolts. Adjust the brake band if necessary
(par. 147b). Lubricate according to LO 5-1185. Report gear, pinion, brake
assembly, and countershaft deficiencies to the proper authority.
112
112
112
First countershaft and drive pinion. Inspect for loose mountings. Check the
countershaft and pinion for wear or damage and for proper pinion adjustment.
Inspect for leaking oil seals and proper lubrication.
112
112
Tighten or replace loose or damaged mounting bolts. Lubricate according to LO 5-
1185. Report a broken or damaged countershaft and other deficiencies to the proper
authority.
MISCELLANEOUS ITEMS
133
133
133
Sprinkler system. Inspect for loose sprinkler tank mountings. Check hose, pipe,
pipe clamps, hose clamps, the filler cap, and the drain petcock for loose connections
and leaks. Inspect the water strainer. Check operation of valves and sprinkler mats.
Check the entire system, tank, and lines before storage or freezing weather.
133
133
Repair the sprinkler tank mounting if loose. Replace worn or damaged hose, pipe, hose
clamps, filler cap, and drain petcock. Replace or repair damaged or faulty mats, mat
supports, and mat plate support (par. 167b). Replace the valve if damaged. Drain
the entire system before storage or freezing weather.
134134
134
Roll scrapers. Inspect the steering roll scraper assembly mounting bracket and
compression roll scraper assembly mounting.
Check the spring tension for
adjustment. Inspect for loose bolts, lockwashers, cotter pins, and nuts. Check the
scrapers for accumulation of dirt and grease.
134
134
Tighten the mounting bracket on the steering roll scraper assembly if loose. Check the
mounting of the compression roll scraper assembly. Replace worn or damaged
mounting bolts, screws, and other hardware. Adjust the spring tension for both
steering and compression roll scraper assemblies. Clean dirt and grease from the
scraper assemblies. Repair or replace the steering roll scraper (par. 163b) if
damaged. Repair or replace the compression roll scraper assembly (par. 164b) if
damaged.
57