TM 5-3895-383-24
Assemble Vibratory Pump 5070-016
1.
Make sure all the pump parts are clean and free of all
dirt and foreign material. Check all parts for damage or
wear. Lubricate all moving parts with clean hydraulic
system oil at the time of assembly.
2.
Use an alien wrench to install two stroking orifices (70)
in the housing. Install the O-ring seal on each plug (69),
and install the two plugs in the housing.
3.
Install O-ring seal (58) on bushing (54). Install bushing
(54) and retaining ring (55) in pump housing (11).
4.
Install O-ring seal (60) on bushing (56). Install retaining
ring (59), bushing (56) and retaining ring (57) in pump
housing (11).
5.
Install bearing (65) on shaft (64) and install retaining
ring (66).
6.
Install shaft (64) and the bearing in the housing, and
install retaining ring (63).
7.
Install seal (62) in housing (11) and install retaining ring
(61).
14-34