TM 5-3895-383-24
6.
Remove four bolts (9), and separate end cover (10)
from housing (11).
7.
Remove plug (13) from end cover (10). Remove the
O-ring seal from the plug. Check the O-ring seal for
wear or damage, and replace if necessary.
8.
Use an allen wrench to remove control orifice (12) from
the end cover.
9.
Remove plug (15), spring (18) and relief valve (16) from
both sides of end cover (10).
10.
Remove bearing (14) and bushing (17) from the end
cover.
11.
Remove O-ring seal (19) from the end cover. Check the
O-ring seal for wear or damage, and replace if
necessary.
12.
Remove O-ring seal (20) and back-up ring (21) from
both plugs (15). Check the O-ring seal and back-up ring
for wear or damage, and replace if necessary.
13.
Remove plug (26), valve spool (25), retainer (24), shims
(23) and spring (22) from end cover (10). Remove the
O-ring seal from the plug. Check the O-ring seal for
wear or damage, and replace if necessary.
14-29