TM 5-3895-383-24
32.
Remove retaining ring (63) and remove shaft (64) from
the housing.
33.
Remove retaining ring (66) and remove bearing (65)
from shaft (64).
34.
Remove plug (68) and pin (67) from housing (11).
Remove the O-ring seal from plug (68). Check the
O-ring seal for damage or wear and replace if
necessary.
35.
Remove two plugs (69). and use an allen wrench to
remove two stroking orifices (70) from the housing.
Remove the O-ring seal from each plug (69). Check the
O-ring seals for damage or wear and replace if
necessary.
14-33